Temperature Control Units

TEMPERATURE CONTROL.

Temperature control units (water and oil heaters).

Water and oil temperature control units for a variety of industrial processes and applications.

  • Water temperature control units with direct or indirect cooling.
  • Indirect cooling capacity up to 200,000kcal/h.
  • Water temperature control units with open systems or pressurised for temperatures up to 160°C.
  • Oil temperature control units up to 350°C. 
  • Heating power from 3 to 300kW.
  • Highly customisable.

FOR ENQUIRIES, CALL 01777 248777 OR EMAIL SALES@INTELICARE.CO.UK

ENQUIRE NOW

WATER TEMPERATURE CONTROL UP TO 90˚C

An essential addition to any processing facility, these water-temperature control units include many inventive features as standard and robust design.

  • 40°C - 90°C 
  • 3kW - 72kW
  • Heater Elements from AISI 316L with solid state heating relays (SSR) for precise control
  • May be supplied without cooling circuit, up to 45,000kcal/hr
  • Heat exchangers may be direct cooling, cooling coil or plate type heat exchanger
  • 5L/min - 650L/min
  • Pumps may be immersed in reservoir or centrifugal pumps 
  • Analogic prootocol interface 4-20mA/0-10vdc
  • Serial protocol PROFIBUS/PROFINET/DEVICENET/ETHERNET TCP-IP
  • Forced air cooling heat exchanger
  • 3-way valve for cooling power control
  • Pressure/vacuum/emptying functioning mode, depending on model
  • Process fluid flow meter
  • Light/acoustic alarm
  • Special options on request

PRESSURISED WATER HEATERS UP TO 170°C

Pressurised water is ideal for those with requirements for higher temperature control, coupled with the benefits of choosing water over oil, including:

  • High efficiency of heat exchangers
  • Longevity 
  • Safety (think spillages)
  • Water is cheaper, and more readily available 
  • More environmentally friendly

 

  • 110°C - 170°C
  • 3kW - 72kW
  • AISI 316L heater elements with low specific charge
  • Solid state heating relays (SSR) for precise temperature control
  • May be specified without cooling, up to 200,000kcal/hr
  • May be direct cooling or indirect with plate type heat exchanger
  • 10L/min - 650L/min. Centrifugal pumps and for units above 160°C, special magnetic couplings are used
  • Analogic prootocol interface 4-20mA/0-10vdc
  • Serial protocol PROFIBUS/PROFINET/DEVICENET/ETHERNET TCP-IP
  • Forced air cooling heat exchanger
  • 3-way valve for cooling power control
  • Pressure/vacuum/emptying functioning mode, depending on model
  • Process fluid flow meter
  • Light/acoustic alarm
  • Special options on request

OIL TEMPERATURE CONTROL

While water temperature control is the 'go-to' option for many of our customers, for some, only oil temperature control will suffice. Why? Because these units are capable of maximum operating temperatures up to 350˚C. What's more, they can be equipped with a variety of pump settings and all electrical heaters are always connected to a solid state relay, for the best heating power results.

 

  • 159°C - 350°C
  • 3kW - 150kW
  • AISI-316L electric heater elements with low specific charge to prevent 'cracking'
  • Solid state heater relays (SSR) for precise temperature control
  • 1000kcal/hr - 200,000kcal/hr
  • Indirect cooling with plate heat exchangers
  • 5L/min - 400L/min
  • Special pumps with mechanical seal
  • Analogic prootocol interface 4-20mA/0-10vdc
  • Serial protocol PROFIBUS/PROFINET/DEVICENET/ETHERNET TCP-IP
  • Forced air cooling heat exchanger
  • 3-way valve for cooling power control
  • Pressure/vacuum/emptying functioning mode, depending on model
  • Process fluid flow meter
  • Light/acoustic alarm
  • Special options on request

LET'S GET STARTED...

Access our expertise and get the products and service you deserve

SPECIFY

Time to get excited - tell us about your project and let us do the rest.

SUPPLY

Custom made at Frigosystem HQ to your exact requirements, your equipment is ready - and of course, we'll organise the logistics

INSTALL

Many customers are happy to set TCUs up themselves, but of course we are on hand to help. If you prefer, we can carry out any installations for you. 

MAINTAIN

We always recommend planned maintenance for complete peace of mind, which of course Intelicare provides. We'll maintain and service your TCUs at times to suit you.

CONTACT US

InteliCare Limited
Bottom Woodbeck Farm
Retford
Nottinghamshire
DN22 0PB

Registered in England and Wales

Company registered number: 05699947

email: sales@intelicare.co.uk
tel: +44 (0)1777 248777
fax:

ABOUT US

Intelicare is the trusted UK partner of leading European suppliers of thermoplastics handling, heating and cooling technology, heated platen presses, industrial ovens and resin dispensing.

FIND OUT MORE
l